Release Notes

Firmware Updates History

Version 1.00.35 [2026-04-08]

New Features:

Added support for toggling the TVOC alarm indicator via a short press of the reset button:

• Alarm status: Red LED blinking
• Enabled: Green LED double blink
• Disabled: Yellow LED double blink

Added platform support on:

Home Assistant (ZHA)
Zigbee2MQTT (Z2M)

Features:

• Air quality threshold configuration (3000–50,000 ppb, default: 6000 ppb)
• TVOC calibration
• mmWave radar detection distance: 1–6 m
• Motion sensitivity: 0–20
• Presence sensitivity: 0–20
• Presence exit time: 1–6
• Enable/disable TVOC alarm LED

Firmware Updates History

Version 1.00.21 [2026-03-23]

Optimization:

• Optimized sensor sampling logic.

Firmware Updates History

Version 1.00.08 [2026-01-22]

New Feature:

• Added support for the Homey platform.

Firmware Updates History

Version 1.00.36 [2025-09-25]

Optimize：

• Improved support for private attributes.
• Optimized battery level display.

Version 1.00.30 [2024-12-02]

• Null

Firmware Updates History

Version 1.00.15 [2025-06-25]

Bug Fixed:

• Bug fixed

Firmware Updates History

Version 1.00.62 [2025-07-17]

Bug Fixed:

• After upgrading from the previous version, users need to reset the network configuration.

Firmware Updates History

Version 1.00.13 [2026-01-20]

Bug Fixed:

• Optimize the logic for determining the open/closed status of garage doors.
• Optimize the indicator lights.

Firmware Updates History

Version 1.00.63 [2025-12-08]

Optimization:

• Keep the offline/online light effect only for the first power-on, and remove it afterward.

Version 1.00.56 [2025-10-09]

Bug Fixed:

• Bug Fixed;

Firmware Updates History

Version 1.01.03 [2026-03-04]

Featured:

• Added support for new products(Smart WaterLeak Sensor WL2,Multi-Function Smart Presence Sensor R3,Smart Button ZB2,Smart Soil Moisture Sensor Gen2)

Version 1.00.91 [2024-12-29]

Bug Fixed:

• Fix the issue of failing to set the offset values for the temperature and humidity sensor and the soil sensor.

Optimization:

• Optimize and enhance the capability of multiple devices to access the internet simultaneously.
• Optimize the task processing capability for frequently controlling the color of lanterns.

New Feature:

• Support new devices: Smart Watering Kit; Smart Soil Moisture Sensor; Smart Bulb ZL1;
• Support Device Custom attribute setting
• Button Report Mode Select
• N-Way Switch Group
• Motion Sensor Cool-Down Time Setting
• Water Leak Sensor Enable/Disable Alarm Siren
• Door Sensor Delay Open Time Setting
• Plug Clear Power Summation
• Smart Blind Enable/Disable PIR Remote Control to save battery life
• Smart Watering Kit Watering Time & Interval Time Setting
• Night Light Cool-Down Time Setting
• Switch & Plug Countdown Timer Setting
• Vibration Sensor Cool-Down Timer Setting
• Soil moisture, temperature, and Humidity Sensor Calibration value Setting

Firmware Updates History

Version 1.00.86 [2025-10-22]

Optimization:

• Optimized online/offline indicator light effects.
• Improved ambient light sensor performance in low-brightness environments.

Firmware Updates History

Version 1.00.40 [2025-04-29]

Bug Fixed:

• Fixed the issue of inconsistency between screen display and reporting.
• Fixed the issue of incorrect battery display on some platforms.

Firmware Updates History

Version 1.00.14 [2026-03-30]

• Fixed power supply display issue.
• Optimize detection sensitivity；

Version 1.00.06 [2025-01-10]

Optimize

Optimize the detection sensitivity

Firmware Updates History

Version 1.00.47 [2026-01-04]

Optimization：

• Support the Hue platform

Firmware Updates History

Version 1.00.55 [2026-03-11]

Bug Fiexd：

• Optimized the state reporting logic

Improvements:

• Added support for curtain height configuration.

Version 1.00.52 [2025-11-26]

Bug Fixes & Improvements:

Optimized state reporting logic.

Improved indicator light behavior.

Added low-battery protection: when the battery is low, the blind will not move upward.

Firmware Updates History

Version 1.00.86 [2025-10-22]

1. Enhanced the effects of the online/offline indicator lights.
2. Improved the performance of the ambient light sensor in low-brightness environments.

Firmware Updates History

Version 1.00.45 [2025-09-11]

Improved reporting of watering time and watering interval for Z2M.

Firmware Updates History

Version 1.00.42 [2025-11-27]

Optimize

Optimize the reporting interval for better performance.

Version 1.00.38 [2025-09-25]

Bug Fixed

Fixed the adjusted voltage calibration coefficient

Version 1.00.36 [2025-09-01]

Bug Fixed
Energy Metering – Fixed an issue with inaccurate energy measurement under low power conditions.

Firmware Updates History

Version 1.00.47 [2025-09-04]

Bug Fixed:

• Change the Z2M power source to battery mode.

Optimization：

• Implemented ultra-long press protection to reduce unnecessary power consumption.

Firmware Updates History

Version 1.00.51 [2025-12-01]

Optimization:

• Optimized attribute reporting configuration using the SDK standard implementation.

Version 1.00.46 [2025-07-17]

New Feature
Added Moisture Measurement Cluster support (0x0408)

Optimization:
Optimized battery level reporting

Improved attribute step-down reporting

Updated default report threshold for temperature and humidity(moisture) to 0.2°C and 0.2% RH

Firmware Updates History

Version 3.00.54 [2024-07-05]

• Added new supported device types: Garage Door Tilt Sensor & T&H Sensor Lite

Firmware Updates History

Version 1.00.55 [2025-01-16]

Optimization:

– Enhance the detection logic of the status trigger for VH gear.

– Cease reporting XYZ three-axis data when the status is not triggered.

Firmware Updates History

Version 1.00.47 [2025-01-06]

Bug Fixed:

• Fixed the problem that the third-party platforms ZHA and Z2M cannot OTA, and from version 1.00.47, support the Hubitat Platform OTA

Optimization:

• Optimize the status reporting logic, add timed reporting of temperature and humidity status, and the interval is 15 minutes

*The Home Assistant platform (Zigbee Home Assistant and Zigbee To MQTT) does not yet support OTA firmware updates for this version. Please stay tuned.

Firmware Updates History

Version 1.00.63 [2024-08-08]

Bug Fixed:

• Optimized the network joining and reconnecting algorithms
• Optimized the power detection logic
• Optimized the trigger filtering algorithm

New Feature:

• Support for customizing delay open report period time 1-3600 s; Default 0 – no delay time.

Firmware Updates History

Version 1.00.73 [2026-01-23]

Bug Fixed:

• Optimized the network joining and reconnecting algorithms
• Sdk update;

Version 1.00.66 [2024-08-08]

Bug Fixed:

• Optimized the network joining and reconnecting algorithms
• Optimized the power detection logic
• Optimized the trigger filtering algorithm

New Feature:

• Support for customizing
• Enable/Disable Local Siren, Default Siren is Enabled.
• Siren Period 1- 255 minutes. Default 0 – unlimited time period

(ZHA Verified：https://github.com/thirdreality/homeassistant/blob/main/ZHA/README_WATER_LEAK.md)

Firmware Updates History

Version 1.00.76 [2024-08-28]

Bug Fixed:

• Optimized the network joining and reconnecting algorithms
• Optimized the power detection logic
• Optimized the trigger filtering algorithm

Firmware Updates History

Version 1.00.80 [2025-10-01]

Optimizations For ZL4:
Optimize calibration platform color blocks
Optimize reset operation

New Feature:
Support ZHA/Z2M Breathe Blink Effect;
Support ZHA Colorloop ;

Version 1.00.74 [2025-09-04]

Bug Fixes:
Z2M Group Scenes – Fixed an issue where colored scenes could not be recalled when the device was added to a Group in Z2M.

Optimizations:
Bulb Reset Handling – Optimized power cycle (on/off) logic during bulb reset.

Standby Power – Reduced standby power consumption for improved energy efficiency.

New Features:
Z2M Effect Support – Implemented colorloop and stop_colorloop functions in the Z2M platform.

Version 1.00.66 [2025-03-12]

Optimization:
Enhanced color accuracy in the color palette across multiple platform apps.

Bug Fixes:

Fixed: In the Alexa App, specific colors required two attempts to be controlled successfully.
Fixed: In the Apple Home App, where color temperature adjustment was not supported.

Version 1.00.56 [2025-01-06]

Bug Fixed:

• Starting from v1.00.56, support Hubitat Platform OTA;

Optimization:

• Support Group & Scene; LevelControl

Version 1.00.38 [2024-11-06]

Bug Fixed:

• Differentiating Off Commands and Brightness 0
• Maintaining Color and Color Temperature Upon Network Reconnection
• Handling Off Command Exceptions in Hubitat’s Default Driver

Optimization:

• Multi-Platform Color Block Calibration Support
• ZHA Home Automation Control Adaptation

Firmware Updates History

Version 1.00.36 [2025-02-26]

New Feature:

• Added a status delay reporting feature (delay open)
• Supporting platforms ZHA, Z2M, Third Reality Smart Bridge MZ1 & 3R-Installer App for custom configuration.

Optimization:

• Further improved the status trigger detection logic.

Version 1.00.29 [2024-07-10]

Bug Fixed:

• Optimized the network joining and reconnecting algorithms
• Added a system health check mechanism
• Fixed excessive power consumption caused by the LED remaining constantly on